本帖最后由 zsp1 于 2016-1-20 15:25 编辑
1、我使用过得其中一款ST的开发板
2、芯片型号：STM32F407VGT6
3、基于STM32的车牌识别的手持移动终端的设计、UI、ucosII等
非常不错！支持ST！
1、 晒出你使用过的STM32开发板/芯片图片（如果还未使用过，可从官网寻找）；
我大二的时候买过原子的MINISTM32开发板，最近使用的是139 STM32的开发板，然后也用过神州IV号STM32开发板
2、 说明该STM32产品型号，列举其一项或者多项特性，同时附件上传一篇该型号产品的资料（官方文档或者网络上的文章分享均可，点击立刻下载官方文档）139的STM32开发板使用了STM32F103ZET6，然后神州IV号开发板使用了STM32F107VCT6，原子的开发板不在身边送人了，记不清他的型号了。
3、 基于STM32你做过哪些设计？（如没有则不写）曾用STM32做mini四轴，然后后面用它做过电赛的题目（2015风力摆控制系统），然后是用到故障显示等项目。
http://upload.semidata.info/sns.eefocus.com/st/document/category/632.jpg
具有LTDC功能，主频可达168M
主要用来做继电器保护产品！
1、 晒出你使用过的STM32开发板/芯片图片（如果还未使用过，可从官网寻找）；
2、 说明该STM32产品型号，列举其一项或者多项特性，同时附件上传一篇该型号产品的资料（官方文档或者网络上的文章分享均可，点击立刻下载官方文档）STM32F469NIH6
STM32F469NIH6 microcontroller featuring 2 Mbytes of Flash memory and 324 Kbytes of RAM in BGA216 package
3、 基于STM32你做过哪些设计？（如没有则不写）
基于stm32的变电站互感器在线监测系统设计
1、这是我申请到的板子STM32F411Nucleo
2、在100 MHz频率下，从Flash存储器执行时，STM32F411能够提供125 DMIPS/339 CoreMark性能，并且利用意法半导体的ART加速器实现了FLASH零等待状态。DSP指令和浮点运算单元扩大了产品的应用范围。
3、得到这块开发板，进行相关测试，测试过程中发现开发神器STM32CUBEMX，后一直钻研该开发软件，学习HAL应用，觉得对提高开发效率很有益处
1、 晒出你使用过的STM32开发板/芯片图片（如果还未使用过，可从官网寻找）；2、 说明该STM32产品型号，列举其一项或者多项特性，同时附件上传一篇该型号产品的资料（官方文档或者网络上的文章分享均可，点击立刻下载官方文档）STM32F746This microcontroller features four I2Cs, six SPIs with three multiplexed simplex I2S, SDMMC, four USARTs, four UARTs, two CANs, three 12-bit ADCs, two 12-bit DACs, two SAIs, 8- to 14-bit digital camera module interface, internal 320+16+4 KB SRAM and 1 MB Flash memory, USB HS OTG, USB FS OTG, Ethernet MAC, FMC interface, Quad-SPI interface, SWD debugging support.
特性介绍：
STM32L151/152器件利用Cortex-M3内核和频率介于32 kHz至32 MHz的CPU时钟扩展了超低功耗理念，并且不会降低性能。除了动态运行和低功耗运行模式以外，还有另外2种超低功耗模式为您带来了极低的功耗，同时还能保持RTC、后备寄存器内容与低压检测器继续工作。STM32L151/152器件面向医疗、工业和消费类应用，其主要特性为片上集成的快速
12位1 MSPS ADC、USB 2.0 FS和电容式触摸感应模块。您可以利用SDIO和FSMC接口扩展存储容量。为了减少应用成本和设计时间，STM32L151/152还提供了具有8x40段的集成式LCD驱动器。STM32L151/152系列具有32~512KB Flash，采用48~144引脚封装。
The ultra-low-power STM32L151xC and STM32L152xC devices incorporate the connectivity power of the universal serial bus (USB) with the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a frequency of 32 MHz (33.3 DMIPS), a memory protection unit (MPU), high-speed embedded memories (Flash memory up to 256 Kbytes and RAM up to 32 Kbytes) and an extensive range of enhanced I/Os and peripherals connected to two APB buses.The STM32L151xC and STM32L152xC devices offer two operational amplifiers, one 12-bit ADC, two DACs, two ultra-low-power comparators, one general-purpose 32-bit timer, six general-purpose 16-bit timers and two basic timers, which can be used as time bases.Moreover, the STM32L151xC and STM32L152xC devices contain standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2S, three USARTs and an USB. The STM32L151xC and STM32L152xC devices offer up to 23 capacitive sensing channels to simply add a touch sensing functionality to any application.They also include a real-time clock and a set of backup registers that remain powered in Standby mode.Finally, the integrated LCD controller (except STM32L151xC devices) has a built-in LCD voltage generator that allows to drive up to 8 multiplexed LCDs with the contrast independent of the supply voltage.The ultra-low-power STM32L151xC and STM32L152xC devices operate from a 1.8 to 3.6 V power supply (down to 1.65 V at power down) with BOR and from a 1.65 to 3.6 V power supply without BOR option. They are available in the -40 to +85 °C and -40 to +105 °C temperature ranges. A comprehensive set of power-saving modes allows the design of low-power applications.
1、 晒出你使用过的STM32开发板/芯片图片（如果还未使用过，可从官网寻找）；
2、 说明该STM32产品型号，列举其一项或者多项特性，同时附件上传一篇该型号产品的资料（官方文档或者网络上的文章分享均可，点击立刻下载官方文档）
NUCLEO-F103RB
The STM32 Nucleo boards offer the following features:
• STM32 microcontroller with LQFP64 package
• Two types of extension resources
– Arduino Uno Revision 3 connectivity
– STMicroelectronics Morpho extension pin headers for full access to all STM32 I/Os
• mbed-enabled (a)
• On-board ST-LINK/V2-1 debugger/programmer with SWD connector
– selection-mode switch to use the kit as a standalone ST-LINK/V2-1
• Flexible board power supply
– USB VBUS
– External VIN (7V<VIN<12V) supply voltage from Arduino connectors or ST
Morpho connector
– External 5V (E5V) supply voltage from ST Morpho connector
– External +3.3V supply voltage from Arduino connector or ST Morpho connector
• Three LEDs
– USB communication (LD1), user LED (LD2), power LED (LD3)
• Two push buttons: USER and RESET
• LSE crystal:
– 32.768kHz crystal oscillator (depending on board version)
• USB re-enumeration capability: three different interfaces supported on USB
– Virtual Com port
– Mass storage
– Debug port
• Comprehensive free software HAL library including a variety of software examples
• Supported by wide choice of Integrated Development Environments (IDEs) including IAR,
Keil, GCC-based IDEs
3、 基于STM32你做过哪些设计？（如没有则不写）
自平衡小车
1.stm32f103c8
2.特性
The STM32F103xx medium-density performance line family incorporates the highperformance ARM Cortex™-M3 32-bit RISC core operating at a 72 MHz frequency, highspeed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes),
and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All
devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as
well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three
USARTs, an USB and a CAN.