本帖最后由 xxpcb 于 2016-1-20 14:14 编辑
1、 晒出你使用过的STM32开发板/芯片图片
STM32F411NUCLEO
2、 说明该STM32产品型号，列举其一项或者多项特性，同时附件上传一篇该型号产品的资料
型号：STM32F411RE
特性：The STM32F4 family incorporates high-speed embedded memories and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix.
- 64-Kbyte of CCM (core coupled memory) data RAM
- LCD parallel interface, 8080/6800 modes
- Timer with quadrature (incremental) encoder input
- 5 V-tolerant I/Os
- Parallel camera interface
- True random number generator
- RTC: subsecond accuracy, hardware calendar
- 96-bit unique ID
3、 基于STM32你做过哪些设计？循迹小车，两轮平衡小车，风力摆等
本帖最后由 火蒂树 于 2016-1-20 14:20 编辑
1、 晒出你使用过的STM32开发板/芯片图片（如果还未使用过，可从官网寻找）；
型号: STM32F030
2、 说明该STM32产品型号，列举其一项或者多项特性，同时附件上传一篇该型号产品的资料（官方文档或者网络上的文章分享均可，点击立刻下载官方文档）
型号: STM32F030
特性:
Core: ARM® 32-bit Cortex™-M0 CPU,
frequency up to 48 MHz
Memories
CRC calculation unit
Reset and power management
Clock management
Up to 55 fast I/Os
5-channel DMA controller
1 x 12-bit, 1.0 µs ADC (up to 16 channels)
Up to 10 timers
Calendar RTC with alarm and periodic wakeup
from Stop/Standby
Communication interfaces
Serial wire debug (SWD)
资料:
3、 基于STM32你做过哪些设计？（如没有则不写）
扭蛋机: 一个刷卡机配16台扭蛋机, 自动统计扭蛋数据上传
精密紫外线检测器: 准确的检测极弱的紫外线强度, 用于光学分析仪器
等等.........
火蒂树 发表于 2016-1-20 14:02
1、 晒出你使用过的STM32开发板/芯片图片（如果还未使用过，可从官网寻找）；
型号: STM32F030
不知这样写可以了没
1、图片
2、F103系列基于Cortex-M3内核，片内Flash分为小容量（16K和32K）、中容量（64K和128K）、大容量（256K、384K和512K）三类，最高72MHz工作频率，单周期乘法和硬件除法，具有功能强大的定时器，I2C，SPI，USART，FSMC，CAN，USB等丰富的功能外设和通讯接口。
3、做过的设计
4x4电容触摸键盘：
电动车充放电和定位控制板：
灵机锁测试板：
1、 晒出你使用过的STM32开发板/芯片图片
这些都是自己的作品
https://www.stmcu.org.cn/module/forum/data/attachment/forum/201601/19/211625d79ja4rg79dtd4z2.jpg
https://www.stmcu.org.cn/module/forum/data/attachment/forum/201601/19/211626bu7mg17xammgacpd.jpg
https://www.stmcu.org.cn/module/forum/data/attachment/forum/201601/19/211633azqpql972g1q21h4.jpg
2、 说明该STM32产品型号，列举其一项或者多项特性，同时附件上传一篇该型号产品的资料（官方文档或者网络上的文章分享均可
型号是STM32F031K6T6。
https://www.stmcu.org.cn/module/forum/static/image/filetype/pdf.gifDM00109263.pdf(1.9 MB, 下载次数: 0)
https://www.stmcu.org.cn/module/forum/static/image/filetype/pdf.gifDM00118828.pdf(240.64 KB, 下载次数: 0)
https://www.stmcu.org.cn/module/forum/static/image/filetype/pdf.gifDM00141386.pdf(1.48 MB, 下载次数: 0)
Features：• Core: ARM® 32-bit Cortex®-M0 CPU, frequency up to 48 MHz• Memories– 16 to 32 Kbytes of Flash memory– 4 Kbytes of SRAM with HW parity• CRC calculation unit• Reset and power management– Digital and I/Os supply: 2.0 to 3.6 V– Analog supply: VDDA = from VDD to 3.6 V – Power-on/Power-down reset (POR/PDR)– Programmable voltage detector (PVD)– Low power modes: Sleep, Stop and Standby– VBAT supply for RTC and backup registers• Clock management– 4 to 32 MHz crystal oscillator– 32 kHz oscillator for RTC with calibration– Internal 8 MHz RC with x6 PLL option– Internal 40 kHz RC oscillator• Up to 39 fast I/Os– All mappable on external interrupt vectors– Up to 26 I/Os with 5 V tolerant capability• 5-channel DMA controller• 1 × 12-bit, 1.0 µs ADC (up to 10 channels)– Conversion range: 0 to 3.6V– Separate analog supply from 2.4 up to 3.6 V• Up to 9 timers– 1 x 16-bit 7-channel advanced-control timer for 6 channels PWM output, with deadtime generation and emergency stop– 1 x 32-bit and 1 x 16-bit timer, with up to 4 IC/OC, usable for IR control decoding– 1 x 16-bit timer, with 2 IC/OC, 1 OCN, deadtime generation and emergency stop– 1 x 16-bit timer, with IC/OC and OCN, deadtime generation, emergency stop and modulator gate for IR control– 1 x 16-bit timer with 1 IC/OC – Independent and system watchdog timers– SysTick timer: 24-bit downcounter• Calendar RTC with alarm and periodic wakeup from Stop/Standby• Communication interfaces– 1 x I2C interface, supporting Fast Mode Plus (1 Mbit/s) with 20 mA current sink, SMBus/PMBus, and wakeup from Stop mode– 1 x USART supporting master synchronous SPI and modem control, ISO7816 interface, LIN, IrDA capability, auto baud rate detection and wakeup feature– 1 x SPI (18 Mbit/s) with 4 to 16 programmable bit frames, with I2S interface multiplexed• Serial wire debug (SWD)• 96-bit unique ID• Extended temperature range: -40 to +105°C• All packages ECOPACK®23、 基于STM32你做过哪些设计？
https://www.stmcu.org.cn/module/forum/data/attachment/forum/201601/19/212250hkzt2ssorn2lsin6.jpg
https://www.stmcu.org.cn/module/forum/data/attachment/forum/201601/19/212256r4jdbbqhjhy0bo7r.jpg
学过正点原子的f103开发板，学过野火的开发板，最近正在用开发板做一个项目。
曾经用stm32做过四轴飞行器，并不十分成功，做过智能小车，这个项目比较成功。:lol附上几个我常用的文件
Features
■ Core: ARM 32-bit Cortex™-M3 CPU
– 72 MHz maximum frequency,
1.25 DMIPS/MHz (Dhrystone 2.1)
performance at 0 wait state memory
access
– Single-cycle multiplication and hardware
division
■ Memories
– 256 to 512 Kbytes of Flash memory
– up to 64 Kbytes of SRAM
– Flexible static memory controller with 4
Chip Select. Supports Compact Flash,
SRAM, PSRAM, NOR and NAND memories
– LCD parallel interface, 8080/6800 modes
■ Clock, reset and supply management
– 2.0 to 3.6 V application supply and I/Os
– POR, PDR, and programmable voltage
detector (PVD)
– 4-to-16 MHz crystal oscillator
– Internal 8 MHz factory-trimmed RC
– Internal 40 kHz RC with calibration
– 32 kHz oscillator for RTC with calibration
■ Low power
– Sleep, Stop and Standby modes
– V
BAT supply for RTC and backup registers
■ 3 × 12-bit, 1 µs A/D converters (up to 21
channels)
– Conversion range: 0 to 3.6 V
– Triple-sample and hold capability
– Temperature sensor
■ 2 × 12-bit D/A converters
■ DMA: 12-channel DMA controller
– Supported peripherals: timers, ADCs, DAC,
SDIO, I2Ss, SPIs, I2Cs and USARTs
■ Debug mode
– Serial wire debug (SWD) & JTAG interfaces
– Cortex-M3 Embedded Trace Macrocell™
■ Up to 112 fast I/O ports
– 51/80/112 I/Os, all mappable on 16
external interrupt vectors and almost all
5 V-tolerant
■ Up to 11 timers
– Up to four 16-bit timers, each with up to 4
IC/OC/PWM or pulse counter and
quadrature (incremental) encoder input
– 2 × 16-bit motor control PWM timers with
dead-time generation and emergency stop
– 2 × watchdog timers (Independent and
Window)
– SysTick timer: a 24-bit downcounter
– 2 × 16-bit basic timers to drive the DAC
■ Up to 13 communication interfaces
– Up to 2 × I2C interfaces (SMBus/PMBus)
– Up to 5 USARTs (ISO 7816 interface, LIN,
IrDA capability, modem control)
– Up to 3 SPIs (18 Mbit/s), 2 with I2S
interface multiplexed
– CAN interface (2.0B Active)
– USB 2.0 full speed interface
– SDIO interface
■ CRC calculation unit, 96-bit unique ID
■ ECOPACK® packages
1、 晒出你使用过的STM32开发板/芯片图片
这些都是自己的作品
https://www.stmcu.org.cn/module/forum/data/attachment/forum/201601/19/211625d79ja4rg79dtd4z2.jpg
https://www.stmcu.org.cn/module/forum/data/attachment/forum/201601/19/211626bu7mg17xammgacpd.jpg
https://www.stmcu.org.cn/module/forum/data/attachment/forum/201601/19/211633azqpql972g1q21h4.jpg
2、 说明该STM32产品型号，列举其一项或者多项特性，同时附件上传一篇该型号产品的资料（官方文档或者网络上的文章分享均可
型号是STM32F031K6T6。
https://www.stmcu.org.cn/module/forum/static/image/filetype/pdf.gifDM00109263.pdf(1.9 MB, 下载次数: 0)
https://www.stmcu.org.cn/module/forum/static/image/filetype/pdf.gifDM00118828.pdf(240.64 KB, 下载次数: 0)
https://www.stmcu.org.cn/module/forum/static/image/filetype/pdf.gifDM00141386.pdf(1.48 MB, 下载次数: 0)
Features：• Core: ARM® 32-bit Cortex®-M0 CPU, frequency up to 48 MHz• Memories– 16 to 32 Kbytes of Flash memory– 4 Kbytes of SRAM with HW parity• CRC calculation unit• Reset and power management– Digital and I/Os supply: 2.0 to 3.6 V– Analog supply: VDDA = from VDD to 3.6 V – Power-on/Power-down reset (POR/PDR)– Programmable voltage detector (PVD)– Low power modes: Sleep, Stop and Standby– VBAT supply for RTC and backup registers• Clock management– 4 to 32 MHz crystal oscillator– 32 kHz oscillator for RTC with calibration– Internal 8 MHz RC with x6 PLL option– Internal 40 kHz RC oscillator• Up to 39 fast I/Os– All mappable on external interrupt vectors– Up to 26 I/Os with 5 V tolerant capability• 5-channel DMA controller• 1 × 12-bit, 1.0 µs ADC (up to 10 channels)– Conversion range: 0 to 3.6V– Separate analog supply from 2.4 up to 3.6 V• Up to 9 timers– 1 x 16-bit 7-channel advanced-control timer for 6 channels PWM output, with deadtime generation and emergency stop– 1 x 32-bit and 1 x 16-bit timer, with up to 4 IC/OC, usable for IR control decoding– 1 x 16-bit timer, with 2 IC/OC, 1 OCN, deadtime generation and emergency stop– 1 x 16-bit timer, with IC/OC and OCN, deadtime generation, emergency stop and modulator gate for IR control– 1 x 16-bit timer with 1 IC/OC – Independent and system watchdog timers– SysTick timer: 24-bit downcounter• Calendar RTC with alarm and periodic wakeup from Stop/Standby• Communication interfaces– 1 x I2C interface, supporting Fast Mode Plus (1 Mbit/s) with 20 mA current sink, SMBus/PMBus, and wakeup from Stop mode– 1 x USART supporting master synchronous SPI and modem control, ISO7816 interface, LIN, IrDA capability, auto baud rate detection and wakeup feature– 1 x SPI (18 Mbit/s) with 4 to 16 programmable bit frames, with I2S interface multiplexed• Serial wire debug (SWD)• 96-bit unique ID• Extended temperature range: -40 to +105°C• All packages ECOPACK®23、 基于STM32你做过哪些设计？
https://www.stmcu.org.cn/module/forum/data/attachment/forum/201601/19/212250hkzt2ssorn2lsin6.jpg
https://www.stmcu.org.cn/module/forum/data/attachment/forum/201601/19/212256r4jdbbqhjhy0bo7r.jpg
1、 晒出你使用过的STM32开发板/芯片图片-- STM32F4 DISCOVERY
2、 说明该STM32产品型号，列举其一项或者多项特性，同时附件上传一篇该型号产品的资料
STM32F407DGT6
Core: ARM® 32-bit Cortex®-M4 CPU with FPU,Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution
from Flash memory, frequency up to 168 MHz,memory protection unit, 210 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
3、 基于STM32你做过哪些设计？
医疗设备：糖化血糖仪、手持式监护仪。
本帖最后由 eurphan 于 2016-1-20 15:03 编辑
芯片型号:F303RET6
特性:主频72MHz，80KB SRAM,512KB FLASH
做过的设计，基于STM32的两轮平衡车
1.
2.
STM32F103VE，内核： ARM 32位的Cortex™-M3 CPU 最高48MHz工作频率， 在存储器的0等待周期访问时可达1.25DMips/MHz(Dhrystone2.1)
3.
原装2.4的TFT屏，修改STemWin移植