WWDG HAS an EWI (early wakeup interrupt) that we can use ? the question is can we refresh the downcounter in the EWI interrupt handler function to avoid system reset ??
I tried to do it ,but seems it doesn't work , and after the interrupt , the WWDG triggerred a system reset even the downcounter has been refreshed in the interrtupt handler.
So could anyone give some advice on that situation?? thanks a lot.  

窗口看门狗，只有在红框时间内，才允许刷新看门狗寄存器（即喂狗），其余时间是不允许喂狗的。一旦达到T6时间，仍然没有喂狗的话，将产生复位。

hello! WWDG 是有区间的，你必须在时间段内喂狗   早了和晚了都会复位的，so你要获取 当前时间进行对比
.sorry   I Cann't English ,I'm from  China

zwjchinayids 发表于 2018-7-24 18:00
hello! WWDG 是有区间的，你必须在时间段内喂狗   早了和晚了都会复位的，so你要获取 当前时间进行对比
.s ...

建议您先看下IWDG  后进行比较

zwjchinayids 发表于 2018-7-24 18:00
hello! WWDG 是有区间的，你必须在时间段内喂狗   早了和晚了都会复位的，so你要获取 当前时间进行对比
.s ...

hello,  I set the window value = 0x7f , which is the max value , and set T[0-6] = 0X7F as well , when the counter reaches 0x40 , triggering a EWI interrupt, my question is in the EWI interrupt handler , is it possible to refresh the T counter ?
thanks.

toofree 发表于 2018-7-24 17:28
窗口看门狗，只有在红框时间内，才允许刷新看门狗寄存器（即喂狗），其余时间是不允许喂狗的。一旦达到T6时 ...

hello,  I set the window value = 0x7f , which is the max value , and set T[0-6] = 0X7F as well , when the counter reaches 0x40 , triggering a EWI interrupt, my question is in the EWI interrupt handler , is it possible to refresh the T counter ?
thanks.

From the user reference , we can see that:

In some applications, the EWI interrupt can be used to manage a software system check
and/or system recovery/graceful degradation, without generating a WWDG reset. In this
case, the corresponding interrupt service routine (ISR) should reload the WWDG counter to avoid the WWDG reset, then trigger the required actions.

But when I reload the WWDG counter , a system reset happened after the interrupt.

hellonsn 发表于 2018-7-25 09:08
From the user reference , we can see that:

In some applications, the EWI interrupt can be used to  ...

hello，I want to see your code how to used.for example： main.zip (2.05 KB, 下载次数: 1)

2018-7-25 09:35 上传

点击文件名下载附件

hellonsn 发表于 2018-7-25 07:36
hello,  I set the window value = 0x7f , which is the max value , and set T[0-6] = 0X7F as well , w ...

不可以的！，这样做可能会出现WWDG误判。
在"主程序喂狗论"中,最"强有的理论依据"就是---"程序跑飞了可是中断不一定会死" （中断一般都有自己固定不变的中断向量地址,这样即使主程序飞,中断也能正确地跳入自己的轨道继续运行.）

我没懂你说的中断是哪种中断.但是你可以修改 看门狗回调函数。不知道我理解你题意了没。

hellonsn 发表于 2018-7-25 07:36
hello,  I set the window value = 0x7f , which is the max value , and set T[0-6] = 0X7F as well , w ...

抱歉，刚刚没看到你说的EWI,发送出去才看到了
这样是可以的，清除标志位后等待一下标志位真正清除，然后再喂狗，退出中断。保证中断只执行一次。