鄙人当前的项目使用一块单色屏，并移植了emwin，现在需要调用emwin的graph控件做折线图，可是创建控件，并绑定了数据结构，仍不见有折线图显示；恳请哪位有相关经验的大神指点一二；在单色屏上使用emwin的graph控件；以下是试探性的代码，按键可以正常显示

pGraph5min = GRAPH_CreateEx(30, 239, 260, 208, WM_HBKWIN, WM_CF_SHOW | WM_CF_CONST_OUTLINE, 0, 0);
// GRAPH_SetUserDraw(GRAPH_Handle hObj, void(* pOwnerDraw)(WM_HWIN, int));
GRAPH_SetBorder(pGraph5min, 30, 10, 20, 15);
// WM_SetHasTrans(pGraph5min);
WIDGET_SetEffect(pGraph5min, &WIDGET_Effect_None);
// GRAPH_SetColor(pGraph5min, GUI_WHITE, GRAPH_CI_BK);
// GRAPH_SetColor(pGraph5min, GUI_WHITE, GRAPH_CI_BORDER);
// GRAPH_SetColor(pGraph5min, GUI_WHITE, GRAPH_CI_FRAME);
// GRAPH_SetColor(pGraph5min, GUI_WHITE, GRAPH_CI_GRID);
//GRAPH_SetGridVis(pGraph5min, 1);
//GRAPH_SetLineStyleH(pGraph5min, GUI_LS_DOT);
//GRAPH_SetLineStyleV(pGraph5min, GUI_LS_DOT);
GRAPH_SetGridDistX(pGraph5min, 25);
GRAPH_SetGridDistY(pGraph5min, 25);
GRAPH_SetGridFixedX(pGraph5min, 1);
pGraph5minDat = GRAPH_DATA_YT_Create(GUI_BLACK, 150, 0, 0);
GRAPH_AttachData(pGraph5min, pGraph5minDat);
GRAPH_DATA_YT_SetOffY(pGraph5minDat, 20);
GRAPH_DATA_YT_SetAlign(pGraph5minDat, GRAPH_ALIGN_LEFT);
GRAPH_DATA_YT_Clear(pGraph5minDat);
int i = 0;
for(; i<150; i++)
{
  GRAPH_DATA_YT_AddValue(pGraph5minDat, i);
}
hbutton = BUTTON_CreateEx(300,50,60,40,WM_HBKWIN, WM_CF_SHOW | WM_CF_CONST_OUTLINE, 0, 0);
BUTTON_SetFont(hbutton, GUI_FONT_20_1);
BUTTON_SetText(hbutton, "BTN");

要不去参考下emWin 2天速成实例教程007_Graph波形曲线图形控件使用，使用STM32单片机通过emWin的GRAPH控件显示波形，emWin实例速成教程007_Graph波形曲线图形控件使用方法等帖子吧。

单色屏移植emwin，需要找到emwin相关LCD驱动。在LCDConf_FlexColor_Template.c中修改相应LCD配置:

例：某型号TFT-lcd驱动:
GUIDRV_FlexColor_SetFunc(pDevice, &PortAPI, GUIDRV_FLEXCOLOR_F66702, GUIDRV_FLEXCOLOR_M16C0B16);

屏幕是小日本的menmory lcd，驱动已经起来了，不是用的官方的驱动，现在字符串，按钮，画线都可以正常显示，graph就不行

feixiang20 发表于 2018-4-13 01:34
要不去参考下emWin 2天速成实例教程007_Graph波形曲线图形控件使用，使用STM32单片机通过emWin的GRAPH控件 ...

好的，我去看看

feixiang20 兄的建议确实是方向，十多年前我也 Porting 过至单色屏，也是改改这 uC-GUI | emWin 所配置的参数就行了，估计应很好使的。

自己用emwin基本函数写了一个，凑合用吧