• <p>//参考手册上代码如下</p><p>NVIC_InitTypeDef NVIC_InitStructure;
• /* Configure the Priority Grouping with 1 bit */
• NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);
• /* Enable TIM3 global interrupt with Preemption Priority 0 and SubPriority as 2 */
• NVIC_InitStructure.NVIC_IRQChannel = TIM3_IRQChannel;
• NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
• NVIC_InitStructure.NVIC_IRQChannelSubPriority = 2;
• NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
• NVIC_InitStructure(&NVIC_InitStructure);
• /* Enable USART1 global interrupt with Preemption Priority 1 and SubPriority as 5 */
• NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQChannel;
• NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
• NVIC_InitStructure.NVIC_IRQChannelSubPriority = 5;
• NVIC_InitStructure(&NVIC_InitStructure);
• /* Enable <font color="red">RTC</font> <font color="red">global interrupt</font> with Preemption Priority 1 and SubPriority as 7 */
• NVIC_InitStructure.NVIC_IRQChannel = RTC_IRQChannel;
• NVIC_InitStructure.NVIC_IRQChannelSubPriority = 7;
• NVIC_InitStructure(&NVIC_InitStructure);
• /* Enable EXTI4 interrupt with Preemption Priority 1 and SubPriority as 7 */
• NVIC_InitStructure.NVIC_IRQChannel = EXTI4_IRQChannel;
• NVIC_InitStructure.NVIC_IRQChannelSubPriority = 7;
• NVIC_InitStructure(&NVIC_InitStructure);
• /* TIM3 interrupt priority is higher than USART1, RTC and EXTI4 interrupts priorities. USART1 interrupt priority is higher than RTC and EXTI4 interrupts priorities. <font color="red">RTC interrupt priority is higher than EXTI4 interrupt prioriy.</font> */
• </p>
  

[color=rgb(51, 102, 153) !important]复制代码

这里最终是把RTC和TIM3都是设置成抢占优先级1，响应优先级7。
1.RTC interrupt priority is higher than EXTI4 interrupt prioriy.是不是错了？
2.global interrupt和普通中断有有什么区别吗？你是如何理解global interrupt的？
3.还有两个通道可以设置成一种优先级吗？

绑定                                                                                             

你设置的是RTC和EXIT4优先级一样吧