stm32F072开发之KEIL初走起

[复制链接]

一花一世界003 发布时间：2015-1-22 14:05

技术帖
文章封面:	-
文章简介:	-

走起-----
之前使用KIEL,一直都是5.00版本，使用起来STM32F系列的都妥妥的，都不知道为什么，在F072上面，遇到了各式各样的问题，先开始也没多想，觉得ST公司提供的文件非常非常的正确，可是在重新安装了KEIL5.10，KEIL5.12时，问题还是不停的出现
毫不犹豫，把遇到的其中几个分享一下-----首先是STM32PACK文件的问题，KEIL在安装的时候不知道抽了什么风，老是PACKINSTALLER无响应，在IMPORT之后好长时间没反应，一点击就无响应，使用器件就没有保障，遂选择一个类似的，唯一是把其中的固件库文件要修改其中一部分
好比来说，选择FLASH有不同，那就改变FLASH文件，ADC位数不同，那就该调整STM32F0XX_ADC.H
/**
  ******************************************************************************
  * @file stm32f0xx_flash.h
  * @author  MCD Application Team
  * @version V1.3.0
  * @date 16-January-2014
  * @brief This file contains all the functions prototypes for the FLASH
  *       firmware library.
  ******************************************************************************
  * @attention
  *
  * <h2><center>© COPYRIGHT 2014 STMicroelectronics</center></h2>
  *
  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
  * You may not use this file except in compliance with the License.
  * You may obtain a copy of the License at:
  *
  *       http://www.st.com/software_license_agreement_liberty_v2
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0XX_FLASH_H
#define __STM32F0XX_FLASH_H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx.h"

/** @addtogroup STM32F0xx_StdPeriph_Driver
  * @{
  */

/** @addtogroup FLASH
  * @{
  */

/* Exported types ------------------------------------------------------------*/

/**
  * @brief  FLASH Status
  */
typedef enum
{
  FLASH_BUSY = 1,
  FLASH_ERROR_WRP,
  FLASH_ERROR_PROGRAM,
  FLASH_COMPLETE,
  FLASH_TIMEOUT
}FLASH_Status;

/* Exported constants --------------------------------------------------------*/

/** @defgroup FLASH_Exported_Constants
  * @{
  */

/** @defgroup FLASH_Latency
  * @{
  */
#define FLASH_Latency_0             ((uint32_t)0x00000000)  /*!< FLASH Zero Latency cycle */
#define FLASH_Latency_1             FLASH_ACR_LATENCY    /*!< FLASH One Latency cycle */

#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_Latency_0) || \
                                 ((LATENCY) == FLASH_Latency_1))
/**
  * @}
  */

/** @defgroup FLASH_Interrupts
  * @{
  */

#define FLASH_IT_EOP                FLASH_CR_EOPIE  /*!< End of programming interrupt source */
#define FLASH_IT_ERR                FLASH_CR_ERRIE  /*!< Error interrupt source */
#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0xFFFFEBFF) == 0x00000000) && (((IT) != 0x00000000)))
/**
  * @}
  */

#define OB_STOP_NoRST                ((uint8_t)0x02) /*!< No reset generated when entering in STOP */
#define OB_STOP_RST                   ((uint8_t)0x00) /*!< Reset generated when entering in STOP */
#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST))
。。。

/** @defgroup FLASH_Option_Bytes_BOOT0SW
  * @{
  */

#define OB_BOOT0_SW                ((uint8_t)0x00) /*!< BOOT0 pin disabled */
#define OB_BOOT0_HW                ((uint8_t)0x80) /*!< BOOT0 pin bonded with GPIO */
#define IS_OB_BOOT0SW(BOOT0) (((BOOT0) == OB_BOOT0_SW) || ((BOOT0) == OB_BOOT0_HW))

/**
  * @}
  */

/** @defgroup FLASH_Option_Bytes_VDDA_Analog_Monitoring
  * @{
  */

#define OB_VDDA_ANALOG_ON             ((uint8_t)0x20) /*!< Analog monitoring on VDDA Power source ON */
#define OB_VDDA_ANALOG_OFF          ((uint8_t)0x00) /*!< Analog monitoring on VDDA Power source OFF */

#define IS_OB_VDDA_ANALOG(ANALOG) (((ANALOG) == OB_VDDA_ANALOG_ON) || ((ANALOG) == OB_VDDA_ANALOG_OFF))

/**
  * @}
  */

/** @defgroup FLASH_Option_Bytes_SRAM_Parity_Enable
  * @{
  */

#define OB_SRAM_PARITY_SET             ((uint8_t)0x00) /*!< SRAM parity enable Set */
#define OB_SRAM_PARITY_RESET          ((uint8_t)0x40) /*!< SRAM parity enable reset */

#define IS_OB_SRAM_PARITY(PARITY) (((PARITY) == OB_SRAM_PARITY_SET) || ((PARITY) == OB_SRAM_PARITY_RESET))

/**
  * @}
  */

/** @defgroup FLASH_Flags
  * @{
  */

#define FLASH_FLAG_BSY                FLASH_SR_BSY    /*!< FLASH Busy flag */
#define FLASH_FLAG_PGERR             FLASH_SR_PGERR /*!< FLASH Programming error flag */
#define FLASH_FLAG_WRPERR             FLASH_SR_WRPERR  /*!< FLASH Write protected error flag */
#define FLASH_FLAG_EOP                FLASH_SR_EOP    /*!< FLASH End of Programming flag */

#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFCB) == 0x00000000) && ((FLAG) != 0x00000000))

#define IS_FLASH_GET_FLAG(FLAG)  (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_PGERR) || \
                              ((FLAG) == FLASH_FLAG_WRPERR) || ((FLAG) == FLASH_FLAG_EOP))

#ifdef __cplusplus
}
#endif

#endif

就是这个方法，就可以了
KEIL，IAR使用非常多，虽然见识了mbed的许多优点，但是我觉得还是喜欢使用KEIL，不知道大家觉得怎么样，欢迎讨论