【NUCLEO-L496ZG评测】 + 开箱、上电

浪迹天涯123

清明小长假第一天接到电话，说有快递送到，我一猜就是板子到了，无奈我已在外地。今天回到家，赶紧去快递点把板子取了回来。1.韵达一直用的纸盒包装

2.为了装进盒子，外包装已被剪坏，还好板子没问题。

3.正面照，开发板集成ST-Link，方便调试；NUCLEO系列惯用的白油及沉金工艺，两个字“漂亮”。板子切割后的毛刺较多，自己用砂纸打磨了一下。

4.反面照，反面更多的是0欧跨接电阻，很简洁。

5.和“NUCLEO-F410RB”的对比图

6.开发板特性如下，相关资料（原理图、BOM等）见链接：http://www.st.com/content/st_com ... /nucleo-l496zg.html

• STM32 microcontroller in LQFP144 package
• SMPS: significantly reduces power consumption in Run mode, by generating Vcore logic supply from an external DC/DC converter. This function is only available on ‘-P’ suffixed boards
• 3 user LEDs
• 2 push-buttons: USER and RESET
• LSE crystal:
  
  • 32.768 kHz crystal oscillator
    
• 2 types of extension resources:
  
  • ST Zio connector including: support for Arduino™ Uno V3 connectivity (A0 to A5, D0 to D15) and additional signals exposing a wide range of peripherals
  • ST morpho extension pin header footprints for full access to all STM32 I/Os
    
• USB OTG or full-speed device with Micro-AB connector
• 4 source options for power supply:
  
  • E5V from ST morpho connectors
  • ST-LINK/V2-1 USB connector
  • USB charger
  • VIN (7 - 12 V) from ST Zio connector
    
• On-board ST-LINK/V2-1 debugger/programmer with SWD connector:
  
  • ST-LINK/V2-1 standalone kit capability
  • USB re-enumeration capability: virtual COM port, mass storage, debug port
    
• Comprehensive free software HAL and LL libraries including a variety of software examples
• Support of a wide choice of Integrated Development Environments (IDEs) including IAR™ , Keil® , GCC-based IDEs
  

7.开发板上电，开发板上电后，Demo运行，除电源指示LED常亮外，板载红色LED3闪烁。

今天的开箱及上电先到这里，后续进行STM32CubeMX工程建立及跑分等测试。

哈佛祖安智

都被剪了