你的浏览器版本过低，可能导致网站不能正常访问！
为了你能正常使用网站功能，请使用这些浏览器。

st-img
chrome st-img
firefox st-img
safari st-img
ie8及以上
返回列表 发新帖
查看: 6765|回复: 4

高手帮我看看STM32F101的RS485通信

[复制链接]
shenshujing

2

主题

16

回帖

0

蝴蝶豆

新手上路

最后登录
1970-1-1
发表于 2011-4-20 10:42:45 | 显示全部楼层 |阅读模式
这个采用的是USART3，RE/ED接在一起，我把这个控制位置高了，就是很简单的发送一个数据给PC机，这边采用的RS485转RS232与电脑连接。但是不能正常发送数据，复位一次在串口接受界面看到00。请高手帮帮忙！
/*******************************************************************************
* File Name          : main.c
* Author             : Wuhan R&D Center, Embest
* Date First Issued  : 08/08/2008
* Description        : Main program body
********************************************************************************/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_lib.h"
#include
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
ErrorStatus HSEStartUpStatus;
/* Private function prototypes -----------------------------------------------*/
void RCC_Configuration(void);
void NVIC_Configuration(void);
void GPIO_Configuration(void);
void USART_Configuration(void);
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name  : main
* Description    : Main program.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
int main(void)
{ // u16 i=0;
  
  
#ifdef DEBUG
  debug();
#endif
  /* Configure the system clocks */
  RCC_Configuration();
   
  /* NVIC Configuration */
  NVIC_Configuration();
  /* Configure the GPIOs */
  GPIO_Configuration();
 
  /* Configure the USART1 */
  USART_Configuration();
 
 // printf("\r\n Welcome to WUHAN R&D Center,Embest  \r\n");
 // printf("\r\n Please Input Character From Keyboard \r\n");
//while(1 )
// { 
//  if(USART_GetFlagStatus(USART1,USART_IT_RXNE)==SET)
//  {           
//   i = USART_ReceiveData(USART1);
//   printf("  %c",i&0xFF);    /* print the input char */
//     
//  }
// }
  GPIOB->ODR = 0x0200;
 for(;;)
 {
    USART_SendData(USART3, 8); //发送一位数据
    while(USART_GetFlagStatus(USART3, USART_FLAG_TXE) == RESET);
    GPIOA->ODR = 0x0002;
 }
}

#ifdef  DEBUG
/*******************************************************************************
* Function Name  : assert_failed
* Description    : Reports the name of the source file and the source line number
*                  where the assert error has occurred.
* Input          : - file: pointer to the source file name
*                  - line: assert error line source number
* Output         : None
* Return         : None
*******************************************************************************/
void assert_failed(u8* file, u32 line)
{
  /* User can add his own implementation to report the file name and line number */
  printf("\n\r Wrong parameter value detected on\r\n");
  printf("       file  %s\r\n", file);
  printf("       line  %d\r\n", line);
   
  /* Infinite loop */
  /* while (1)
  {
  } */
}
#endif
/*******************************************************************************
* Function Name  : RCC_Configuration
* Description    : Configures the different system clocks.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void RCC_Configuration(void)
{
  /* RCC system reset(for debug purpose) */
  RCC_DeInit();
  /* Enable HSE */
  RCC_HSEConfig(RCC_HSE_ON);
  /* Wait till HSE is ready */
  HSEStartUpStatus = RCC_WaitForHSEStartUp();
  if(HSEStartUpStatus == SUCCESS)
  {
    /* HCLK = SYSCLK */
    RCC_HCLKConfig(RCC_SYSCLK_Div1);
 
    /* PCLK2 = HCLK */
    RCC_PCLK2Config(RCC_HCLK_Div1);
    /* PCLK1 = HCLK/2 */
    RCC_PCLK1Config(RCC_HCLK_Div2);
    /* Flash 2 wait state */
    FLASH_SetLatency(FLASH_Latency_2);
    /* Enable Prefetch Buffer */
    FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable);
    /* PLLCLK = 8MHz * 9 = 72 MHz */
    RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9);
    /* Enable PLL */
    RCC_PLLCmd(ENABLE);
    /* Wait till PLL is ready */
    while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET)
    {
    }
    /* Select PLL as system clock source */
    RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
    /* Wait till PLL is used as system clock source */
    while(RCC_GetSYSCLKSource() != 0x08)
    {
    }
  }
  
  /* Enable USART1 and GPIOA clock */
  RCC_APB2PeriphClockCmd(  RCC_APB2Periph_GPIOB|RCC_APB2Periph_GPIOA, ENABLE);
  RCC_APB1PeriphClockCmd( RCC_APB1Periph_USART3,ENABLE);
 }
/*******************************************************************************
* Function Name  : NVIC_Configuration
* Description    : Configures Vector Table base location.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void NVIC_Configuration(void)
{
#ifdef  VECT_TAB_RAM 
  /* Set the Vector Table base location at 0x20000000 */
  NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0);
#else  /* VECT_TAB_FLASH  */
  /* Set the Vector Table base location at 0x08000000 */
  NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0);  
#endif
}
/*******************************************************************************
* Function Name  : GPIO_Configuration
* Description    : Configures the different GPIO ports.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void GPIO_Configuration(void)
{
   GPIO_InitTypeDef GPIO_InitStructure;
 /* Configure PC. as Output push-pull */
  GPIO_InitStructure.GPIO_Pin =GPIO_Pin_0|GPIO_Pin_1|GPIO_Pin_4|GPIO_Pin_5|GPIO_Pin_6|GPIO_Pin_7|GPIO_Pin_11|GPIO_Pin_12;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;//输出
  GPIO_Init(GPIOA, &GPIO_InitStructure);
 
   GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
   GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
  GPIO_Init(GPIOB, &GPIO_InitStructure);
  /* Configure USART1 Tx (PB.10) as alternate function push-pull */
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_Init(GPIOB, &GPIO_InitStructure);
   
  /* Configure USART1 Rx (PAB.11) as input floating */
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_Init(GPIOB, &GPIO_InitStructure);

}
/*******************************************************************************
* Function Name  : USART_Configuration
* Description    : Configures the USART1.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void USART_Configuration(void)
{
  USART_InitTypeDef USART_InitStructure;
  USART_ClockInitTypeDef  USART_ClockInitStructure;
/* USART1 configuration -----------------------------------------------
-------*/
  /* USART1 configured as follow:
        - BaudRate = 115200 baud 
        - Word Length = 8 Bits
        - One Stop Bit
        - No parity
        - Hardware flow control disabled (RTS and CTS signals)
        - Receive and transmit enabled
        - USART Clock disabled
        - USART CPOL: Clock is active low
        - USART CPHA: Data is captured on the middle
        - USART LastBit: The clock pulse of the last data bit is not
output to
                         the SCLK pin
  */
USART_ClockInitStructure.USART_Clock = USART_Clock_Disable;
USART_ClockInitStructure.USART_CPOL = USART_CPOL_Low;
USART_ClockInitStructure.USART_CPHA = USART_CPHA_2Edge;
USART_ClockInitStructure.USART_LastBit = USART_LastBit_Disable;
/* Configure the USART1 synchronous paramters */
USART_ClockInit(USART3, &USART_ClockInitStructure);
USART_InitStructure.USART_BaudRate = 9600;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No ;
USART_InitStructure.USART_HardwareFlowControl =
USART_HardwareFlowControl_None;

USART_InitStructure.USART_Mode = USART_Mode_Rx |  USART_Mode_Tx;
/* Configure USART1 basic and asynchronous paramters */
USART_Init(USART3, &USART_InitStructure);
   
  /* Enable USART1 */
  USART_Cmd(USART3, ENABLE);
}
/*******************************************************************************
* Function Name  : fputc
* Description    : Retargets the C library printf function to the USART.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
int fputc(int ch, FILE *f)
{
  /* Place your implementation of fputc here */
  /* e.g. write a character to the USART */
  USART_SendData(USART3, (u8) ch);
  /* Loop until the end of transmission */
  while(USART_GetFlagStatus(USART3, USART_FLAG_TC) == RESET)
  {
  }
  return ch;
}
/******************* (C) COPYRIGHT 2007 STMicroelectronics *****END OF FILE****/
/*******************************************************************************
* File Name          : main.c
* Author             : Wuhan R&D Center, Embest
* Date First Issued  : 08/08/2008
* Description        : Main program body
********************************************************************************/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x_lib.h"
#include
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
ErrorStatus HSEStartUpStatus;
/* Private function prototypes -----------------------------------------------*/
void RCC_Configuration(void);
void NVIC_Configuration(void);
void GPIO_Configuration(void);
void USART_Configuration(void);
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name  : main
* Description    : Main program.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
int main(void)
{ // u16 i=0;
  
  
#ifdef DEBUG
  debug();
#endif
  /* Configure the system clocks */
  RCC_Configuration();
   
  /* NVIC Configuration */
  NVIC_Configuration();
  /* Configure the GPIOs */
  GPIO_Configuration();
 
  /* Configure the USART1 */
  USART_Configuration();
 
 // printf("\r\n Welcome to WUHAN R&D Center,Embest  \r\n");
 // printf("\r\n Please Input Character From Keyboard \r\n");
//while(1 )
// { 
//  if(USART_GetFlagStatus(USART1,USART_IT_RXNE)==SET)
//  {           
//   i = USART_ReceiveData(USART1);
//   printf("  %c",i&0xFF);    /* print the input char */
//     
//  }
// }
  GPIOB->ODR = 0x0200;
 for(;;)
 {
    USART_SendData(USART3, 8); //发送一位数据
    while(USART_GetFlagStatus(USART3, USART_FLAG_TXE) == RESET);
    GPIOA->ODR = 0x0002;
 }
}

#ifdef  DEBUG
/*******************************************************************************
* Function Name  : assert_failed
* Description    : Reports the name of the source file and the source line number
*                  where the assert error has occurred.
* Input          : - file: pointer to the source file name
*                  - line: assert error line source number
* Output         : None
* Return         : None
*******************************************************************************/
void assert_failed(u8* file, u32 line)
{
  /* User can add his own implementation to report the file name and line number */
  printf("\n\r Wrong parameter value detected on\r\n");
  printf("       file  %s\r\n", file);
  printf("       line  %d\r\n", line);
   
  /* Infinite loop */
  /* while (1)
  {
  } */
}
#endif
/*******************************************************************************
* Function Name  : RCC_Configuration
* Description    : Configures the different system clocks.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void RCC_Configuration(void)
{
  /* RCC system reset(for debug purpose) */
  RCC_DeInit();
  /* Enable HSE */
  RCC_HSEConfig(RCC_HSE_ON);
  /* Wait till HSE is ready */
  HSEStartUpStatus = RCC_WaitForHSEStartUp();
  if(HSEStartUpStatus == SUCCESS)
  {
    /* HCLK = SYSCLK */
    RCC_HCLKConfig(RCC_SYSCLK_Div1);
 
    /* PCLK2 = HCLK */
    RCC_PCLK2Config(RCC_HCLK_Div1);
    /* PCLK1 = HCLK/2 */
    RCC_PCLK1Config(RCC_HCLK_Div2);
    /* Flash 2 wait state */
    FLASH_SetLatency(FLASH_Latency_2);
    /* Enable Prefetch Buffer */
    FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable);
    /* PLLCLK = 8MHz * 9 = 72 MHz */
    RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9);
    /* Enable PLL */
    RCC_PLLCmd(ENABLE);
    /* Wait till PLL is ready */
    while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET)
    {
    }
    /* Select PLL as system clock source */
    RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
    /* Wait till PLL is used as system clock source */
    while(RCC_GetSYSCLKSource() != 0x08)
    {
    }
  }
  
  /* Enable USART1 and GPIOA clock */
  RCC_APB2PeriphClockCmd(  RCC_APB2Periph_GPIOB|RCC_APB2Periph_GPIOA, ENABLE);
  RCC_APB1PeriphClockCmd( RCC_APB1Periph_USART3,ENABLE);
 }
/*******************************************************************************
* Function Name  : NVIC_Configuration
* Description    : Configures Vector Table base location.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void NVIC_Configuration(void)
{
#ifdef  VECT_TAB_RAM 
  /* Set the Vector Table base location at 0x20000000 */
  NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0);
#else  /* VECT_TAB_FLASH  */
  /* Set the Vector Table base location at 0x08000000 */
  NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0);  
#endif
}
/*******************************************************************************
* Function Name  : GPIO_Configuration
* Description    : Configures the different GPIO ports.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void GPIO_Configuration(void)
{
   GPIO_InitTypeDef GPIO_InitStructure;
 /* Configure PC. as Output push-pull */
  GPIO_InitStructure.GPIO_Pin =GPIO_Pin_0|GPIO_Pin_1|GPIO_Pin_4|GPIO_Pin_5|GPIO_Pin_6|GPIO_Pin_7|GPIO_Pin_11|GPIO_Pin_12;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;//输出
  GPIO_Init(GPIOA, &GPIO_InitStructure);
 
   GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
   GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
  GPIO_Init(GPIOB, &GPIO_InitStructure);
  /* Configure USART1 Tx (PB.10) as alternate function push-pull */
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_Init(GPIOB, &GPIO_InitStructure);
   
  /* Configure USART1 Rx (PAB.11) as input floating */
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_Init(GPIOB, &GPIO_InitStructure);

}
/*******************************************************************************
* Function Name  : USART_Configuration
* Description    : Configures the USART1.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
void USART_Configuration(void)
{
  USART_InitTypeDef USART_InitStructure;
  USART_ClockInitTypeDef  USART_ClockInitStructure;
/* USART1 configuration -----------------------------------------------
-------*/
  /* USART1 configured as follow:
        - BaudRate = 115200 baud 
        - Word Length = 8 Bits
        - One Stop Bit
        - No parity
        - Hardware flow control disabled (RTS and CTS signals)
        - Receive and transmit enabled
        - USART Clock disabled
        - USART CPOL: Clock is active low
        - USART CPHA: Data is captured on the middle
        - USART LastBit: The clock pulse of the last data bit is not
output to
                         the SCLK pin
  */
USART_ClockInitStructure.USART_Clock = USART_Clock_Disable;
USART_ClockInitStructure.USART_CPOL = USART_CPOL_Low;
USART_ClockInitStructure.USART_CPHA = USART_CPHA_2Edge;
USART_ClockInitStructure.USART_LastBit = USART_LastBit_Disable;
/* Configure the USART1 synchronous paramters */
USART_ClockInit(USART3, &USART_ClockInitStructure);
USART_InitStructure.USART_BaudRate = 9600;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No ;
USART_InitStructure.USART_HardwareFlowControl =
USART_HardwareFlowControl_None;

USART_InitStructure.USART_Mode = USART_Mode_Rx |  USART_Mode_Tx;
/* Configure USART1 basic and asynchronous paramters */
USART_Init(USART3, &USART_InitStructure);
   
  /* Enable USART1 */
  USART_Cmd(USART3, ENABLE);
}
/*******************************************************************************
* Function Name  : fputc
* Description    : Retargets the C library printf function to the USART.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
int fputc(int ch, FILE *f)
{
  /* Place your implementation of fputc here */
  /* e.g. write a character to the USART */
  USART_SendData(USART3, (u8) ch);
  /* Loop until the end of transmission */
  while(USART_GetFlagStatus(USART3, USART_FLAG_TC) == RESET)
  {
  }
  return ch;
}
/******************* (C) COPYRIGHT 2007 STMicroelectronics *****END OF FILE****/
 

main.txt

下载

9.28 KB, 下载次数: 16, 下载积分: ST金币 -1

回复

使用道具 举报

瘦猪呆兔

7

主题

62

回帖

0

蝴蝶豆

新手上路

最后登录
2020-6-1
发表于 2011-4-20 11:25:01 | 显示全部楼层

RE:高手帮我看看STM32F101的RS485通信

貌似没有这个函数啊！ USART_SendData();
回复 支持 反对

使用道具 举报

安

134

主题

4489

回帖

239

蝴蝶豆

版主

最后登录
2020-12-9
发表于 2011-4-20 14:42:18 | 显示全部楼层

RE:高手帮我看看STM32F101的RS485通信

你配置了串口，但是没有配置串口的IO口。你把IO口再重新配置一下。还有就是要注意你使用的是串口3是不是需要映射。
回复 支持 反对

使用道具 举报

zhouke58

16

主题

121

回帖

0

蝴蝶豆

初级会员

最后登录
2020-8-5
发表于 2011-4-20 15:50:24 | 显示全部楼层

RE:高手帮我看看STM32F101的RS485通信

你的配置看起来没有问题.给你说下接RS485的注意事项:
1.RE/ED端在转换发送接收时一定要加足够的延时,因为485IC比不了我们的STM32F101快.即使没有改变也最好加点延时
2.还有你的IO口: GPIOB->ODR = 0x0200;和GPIOA->ODR = 0x0002;是干什么用的?你是否有控制RE/ED端为发送.
回复 支持 反对

使用道具 举报

shenshujing

2

主题

16

回帖

0

蝴蝶豆

新手上路

最后登录
1970-1-1
 楼主| 发表于 2011-4-20 16:59:40 | 显示全部楼层

RE:高手帮我看看STM32F101的RS485通信

谢谢高位的意见，软件应该没有问题，我选定芯片UASRT3貌似没有。
Available only on devices with a Flash memory density equal or higher than 64 Kbytes.
我选的是STM32F101C6。
我换了个UASRT2试了试可用发送了。
回复 支持 反对

使用道具 举报

返回列表 发新帖
关于意法半导体
我们是谁
投资者关系
意法半导体可持续发展举措
创新与技术
招聘信息
联系我们
联系ST分支机构
寻找销售人员和分销渠道
社区
媒体中心
活动与培训
隐私策略
隐私策略
Cookies管理
行使您的权利
关注我们
st-img 微信公众号
st-img 手机版