NUCLEO-F413ZH开发板评测及工程示例（基于HAL库）

wjandsq · 发表于 2016-12-13 11:15:09

System Workbench for STM32 - C/C++ Embedded Development Tools for MCU

System Workbench for STM32 - C/C++ Embedded Development Tools for MCU
（STM32官网）

Installation

Installation of System Workbench for STM32 - Bare edition will be done through the standard Eclipse installer.
You should Start Eclipse then open menu "Help >> Install New Software"; this will open the "Available Software" dialog:
You must then create a new update site, to be able to install System Workbench for STM32 - Bare Metal Edition:
1. You should click on "Add:"
2. Then give a name to the update site (System Workbench for STM32 - Bare Machine edition) and set the location to http://www.openstm32.org/Eclipse ... stem-workbench.site
3. Then click "OK" to create the update site
Then you should select all of the OpenSTM32 tools and click "Next>"

You will then just have to accept the license and System Workbench for STM32 - Bare Metal edition will install itself in your Eclipse setup.
Note that you will probably have to restart Eclipse for the tools to be available; Eclipse will automatically suggest the restart.