【HAL库每天一例】第059例：USB-SD卡模拟U盘
【HAL库每天一例】系列例程从今天开始持续更新。。。。。我们将坚持每天至少发布一个基于YS-F1Pro开发板的HAL库例程，
该系列例程将带领大家从零开始使用HAL库，后面会持续添加模块应用例程。
同样的，我们还程序发布基于HAL库的指导文档和视频教程，欢迎持续关注，并提出改进意见。
例程下载：
资料包括程序、相关说明资料以及软件使用截图
链接：https://pan.baidu.com/s/1i574oPv
密码：r3s3
（硬石YS-F1Pro开发板HAL库例程持续更新\1. 软件设计之基本裸机例程(HAL库版本)\YSF1_HAL-059. USB-SD卡模拟U盘）
/**
******************************************************************************
* 硬石YS-F1Pro开发板例程功能说明
*
*例程名称: YSF1_HAL-059. USB-SD卡模拟U盘
*
******************************************************************************
* 说明：
* 本例程配套硬石stm32开发板YS-F1Pro使用。
*
* 淘宝：
* 论坛：硬石电子社区
* 版权归硬石嵌入式开发团队所有，请勿商用。
******************************************************************************
*/
【1】例程简介
STM32F103ZET6内部集成USB控制器，在无需外接芯片可以做为USB从设备。
【2】跳线帽情况
******* 为保证例程正常运行，必须插入以下跳线帽 **********
丝印编号 IO端口 目标功能引脚 出厂默认设置
JP1 PA10 TXD(CH340G) 已接入
JP2 PA9 RXD(CH340G) 已接入
JP3 PB0 LED1 已接入
【3】操作及现象
将一张小于32G大小的Micro SD卡插入到开发板上的SD卡槽内，使用开发板配套USB线连接
到开发板标示“USB协议”字样的MIMI USB接口，打开开发板电源开关。下载完程序之后，
在电脑端会发现“可移动硬盘”并自动安装驱动，然后在“我的电脑”中就可以发现SD卡设
备，效果与读卡器相同。对于容量较大的设备，需要一定的扫描时间才可以打开。正常运行
后开发板LED1灯不断闪烁。
/******************* (C) COPYRIGHT 2015-2020 硬石嵌入式开发团队 *****END OF FILE****/
usbd_msc_storage.c文件内容
/**
******************************************************************************
* @file : usbd_storage_if.c
* @brief : Memory management layer
******************************************************************************
* COPYRIGHT(c) 2016 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usbd_msc_storage.h"
/* USER CODE BEGIN INCLUDE */
#include "sdio/bsp_sdcard.h"
/* USER CODE END INCLUDE */
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_STORAGE
* @brief usbd core module
* @{
*/
/** @defgroup USBD_STORAGE_Private_TypesDefinitions
* @{
*/
/* USER CODE BEGIN PRIVATE_TYPES */
/* USER CODE END PRIVATE_TYPES */
/**
* @}
*/
/** @defgroup USBD_STORAGE_Private_Defines
* @{
*/
#define STORAGE_LUN_NBR 1
#define STORAGE_BLK_SIZ 0x200
/* USER CODE BEGIN PRIVATE_DEFINES */
/* USER CODE END PRIVATE_DEFINES */
/**
* @}
*/
/** @defgroup USBD_STORAGE_Private_Macros
* @{
*/
/* USER CODE BEGIN PRIVATE_MACRO */
/* USER CODE END PRIVATE_MACRO */
/**
* @}
*/
/** @defgroup USBD_STORAGE_IF_Private_Variables
* @{
*/
/* USB handler declaration */
/* Handle for USB Full Speed IP */
USBD_HandleTypeDef*hUsbDevice_0;
/* USER CODE BEGIN INQUIRY_DATA_FS */
/* USB Mass storage Standard Inquiry Data */
const int8_tSTORAGE_Inquirydata_FS[] = {//36
/* LUN 0 */
0x00,
0x80,
0x02,
0x02,
(STANDARD_INQUIRY_DATA_LEN - 5),
0x00,
0x00,
0x00,
'S', 'T', 'M', ' ', ' ', ' ', ' ', ' ', /* Manufacturer : 8 bytes */
'P', 'r', 'o', 'd', 'u', 'c', 't', ' ', /* Product : 16 Bytes */
' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
'0', '.', '0' ,'1', /* Version : 4 Bytes */
};
/* USER CODE END INQUIRY_DATA_FS */
/* USER CODE BEGIN PRIVATE_VARIABLES */
/* USER CODE END PRIVATE_VARIABLES */
/**
* @}
*/
/** @defgroup USBD_STORAGE_IF_Exported_Variables
* @{
*/
extern USBD_HandleTypeDef hUsbDeviceFS;
/* USER CODE BEGIN EXPORTED_VARIABLES */
/* USER CODE END EXPORTED_VARIABLES */
/**
* @}
*/
/** @defgroup USBD_STORAGE_Private_FunctionPrototypes
* @{
*/
static int8_t STORAGE_Init_FS (uint8_t lun);
static int8_t STORAGE_GetCapacity_FS (uint8_t lun, uint32_t *block_num, uint16_t *block_size);
static int8_t STORAGE_IsReady_FS (uint8_t lun);
static int8_t STORAGE_IsWriteProtected_FS (uint8_t lun);
static int8_t STORAGE_Read_FS (uint8_t lun, uint8_t *buf, uint32_t blk_addr,uint16_t blk_len);
static int8_t STORAGE_Write_FS (uint8_t lun, uint8_t *buf, uint32_t blk_addr,uint16_t blk_len);
static int8_t STORAGE_GetMaxLun_FS (void);
/* USER CODE BEGIN PRIVATE_FUNCTIONS_DECLARATION */
/* USER CODE END PRIVATE_FUNCTIONS_DECLARATION */
/**
* @}
*/
USBD_StorageTypeDef USBD_Storage_Interface_fops_FS =
{
STORAGE_Init_FS,
STORAGE_GetCapacity_FS,
STORAGE_IsReady_FS,
STORAGE_IsWriteProtected_FS,
STORAGE_Read_FS,
STORAGE_Write_FS,
STORAGE_GetMaxLun_FS,
(int8_t *)STORAGE_Inquirydata_FS,
};
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name: STORAGE_Init_FS
* Description :
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
int8_t STORAGE_Init_FS (uint8_t lun)
{
/* USER CODE BEGIN 2 */
MX_SDIO_SD_Init();
return (USBD_OK);
/* USER CODE END 2 */
}
/*******************************************************************************
* Function Name: STORAGE_GetCapacity_FS
* Description :
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
int8_t STORAGE_GetCapacity_FS (uint8_t lun, uint32_t *block_num, uint16_t *block_size)
{
/* USER CODE BEGIN 3 */
/* Get SD card Information */
HAL_SD_Get_CardInfo(&hsdcard, &SDCardInfo);
*block_num= SDCardInfo.CardCapacity/STORAGE_BLK_SIZ-1;
*block_size = STORAGE_BLK_SIZ;
return (USBD_OK);
/* USER CODE END 3 */
}
/*******************************************************************************
* Function Name: STORAGE_IsReady_FS
* Description :
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
int8_tSTORAGE_IsReady_FS (uint8_t lun)
{
/* USER CODE BEGIN 4 */
if(HAL_SD_GetStatus(&hsdcard)==SD_TRANSFER_OK)
return (USBD_OK);
else
return -1;
/* USER CODE END 4 */
}
/*******************************************************************************
* Function Name: STORAGE_IsWriteProtected_FS
* Description :
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
int8_tSTORAGE_IsWriteProtected_FS (uint8_t lun)
{
/* USER CODE BEGIN 5 */
return (USBD_OK);
/* USER CODE END 5 */
}
/**
* @brief SD_DMAConfigRx
* @par Function Description
* This function configure the DMA to receive data from the SD card
* @retval
*SD_ERROR or SD_OK
*/
HAL_SD_ErrorTypedef SD_DMAConfigRx(SD_HandleTypeDef *hsd)
{
static DMA_HandleTypeDef hdma_rx;
HAL_StatusTypeDef status = HAL_ERROR;
if(hsd->hdmarx == NULL)
{
/* Configure DMA Rx parameters */
hdma_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
hdma_rx.Init.PeriphInc = DMA_PINC_DISABLE;
hdma_rx.Init.MemInc = DMA_MINC_ENABLE;
hdma_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
hdma_rx.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
hdma_rx.Init.Priority = DMA_PRIORITY_VERY_HIGH;
hdma_rx.Instance = DMA2_Channel4;
/* Associate the DMA handle */
__HAL_LINKDMA(hsd, hdmarx, hdma_rx);
/* Stop any ongoing transfer and reset the state*/
HAL_DMA_Abort(&hdma_rx);
/* Deinitialize the Channel for new transfer */
HAL_DMA_DeInit(&hdma_rx);
/* Configure the DMA Channel */
status = HAL_DMA_Init(&hdma_rx);
/* NVIC configuration for DMA transfer complete interrupt */
HAL_NVIC_SetPriority(DMA2_Channel4_5_IRQn, 1, 0);
HAL_NVIC_EnableIRQ(DMA2_Channel4_5_IRQn);
}
else
{
status = HAL_OK;
}
return (status != HAL_OK? SD_ERROR : SD_OK);
}
/**
* @brief SD_DMAConfigTx
* @par Function Description
* This function configure the DMA to transmit data to the SD card
* @retval
*SD_ERROR or SD_OK
*/
HAL_SD_ErrorTypedef SD_DMAConfigTx(SD_HandleTypeDef *hsd)
{
static DMA_HandleTypeDef hdma_tx;
HAL_StatusTypeDef status;
if(hsd->hdmatx == NULL)
{
/* Configure DMA Tx parameters */
hdma_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
hdma_tx.Init.PeriphInc = DMA_PINC_DISABLE;
hdma_tx.Init.MemInc = DMA_MINC_ENABLE;
hdma_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
hdma_tx.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
hdma_tx.Init.Priority = DMA_PRIORITY_VERY_HIGH;
hdma_tx.Instance = DMA2_Channel4;
/* Associate the DMA handle */
__HAL_LINKDMA(hsd, hdmatx, hdma_tx);
/* Stop any ongoing transfer and reset the state*/
HAL_DMA_Abort(&hdma_tx);
/* Deinitialize the Channel for new transfer */
HAL_DMA_DeInit(&hdma_tx);
/* Configure the DMA Channel */
status = HAL_DMA_Init(&hdma_tx);
/* NVIC configuration for DMA transfer complete interrupt */
HAL_NVIC_SetPriority(DMA2_Channel4_5_IRQn, 1, 0);
HAL_NVIC_EnableIRQ(DMA2_Channel4_5_IRQn);
}
else
{
status = HAL_OK;
}
return (status != HAL_OK? SD_ERROR : SD_OK);
}
/*******************************************************************************
* Function Name: STORAGE_Read_FS
* Description :
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
int8_t STORAGE_Read_FS (uint8_t lun,
uint8_t *buf,
uint32_t blk_addr,
uint16_t blk_len)
{
/* USER CODE BEGIN 6 */
uint8_t state = 0;
hsdcard.hdmatx=NULL;
/* Prepare the dma channel for a read operation */
state = ((SD_DMAConfigRx(&hsdcard) == SD_OK) ? 0 : -1);
if(state == 0)
{
/* Read block(s) in DMA transfer mode */
state = ((HAL_SD_ReadBlocks_DMA(&hsdcard,(uint32_t *)buf,
blk_addr*STORAGE_BLK_SIZ, STORAGE_BLK_SIZ, blk_len) == SD_OK) ? 0 : -1);
/* Wait until transfer is complete */
if(state == 0)
{
state = ((HAL_SD_CheckReadOperation(&hsdcard, (uint32_t)0xFFFFFFFF) == SD_OK) ? 0 : -1);
}
}
return (state);
/* USER CODE END 6 */
}
/*******************************************************************************
* Function Name: STORAGE_Write_FS
* Description :
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
int8_t STORAGE_Write_FS (uint8_t lun,
uint8_t *buf,
uint32_t blk_addr,
uint16_t blk_len)
{
/* USER CODE BEGIN 7 */
uint8_t state = 0;
/* Invalidate the dma rx handle*/
hsdcard.hdmarx = NULL;
/* Prepare the dma channel for a read operation */
state = ((SD_DMAConfigTx(&hsdcard) == SD_OK) ? 0 : -1);
if(state == 0)
{
/* Write block(s) in DMA transfer mode */
state = ((HAL_SD_WriteBlocks_DMA(&hsdcard, (uint32_t *)buf,
blk_addr*STORAGE_BLK_SIZ, STORAGE_BLK_SIZ, blk_len) == SD_OK) ? 0 : -1);
/* Wait until transfer is complete */
if(state == 0)
{
state = ((HAL_SD_CheckWriteOperation(&hsdcard, (uint32_t)0xFFFFFFFF) == SD_OK) ? 0 : -1);
}
}
return state;
/* USER CODE END 7 */
}
/*******************************************************************************
* Function Name: STORAGE_GetMaxLun_FS
* Description :
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
int8_t STORAGE_GetMaxLun_FS (void)
{
/* USER CODE BEGIN 8 */
return (STORAGE_LUN_NBR - 1);
/* USER CODE END 8 */
}
/* USER CODE BEGIN PRIVATE_FUNCTIONS_IMPLEMENTATION */
/* USER CODE END PRIVATE_FUNCTIONS_IMPLEMENTATION */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
本帖最后由 hpdell 于 2016-12-6 12:22 编辑
不错不错， 可惜现在下载不了哟 hpdell 发表于 2016-12-6 12:17
不错不错， 可惜现在下载不了哟
百度云盘：https://pan.baidu.com/s/1slN8rIt 密码：u6m1 haohao663 发表于 2016-12-6 16:24
百度云盘：https://pan.baidu.com/s/1slN8rIt 密码：u6m1
多谢多谢了啊 好:lol 咦没有这个帖子的源代码吗？云盘没找到啊:(
页:
[1]