【STM32F303开发】+ 最新固件V2.J24.M11——by shadow丶
本帖最后由 shadow丶 于 2015-6-21 20:56 编辑MDK点灯：
【STM32F303开发】+ 非CubeKeil环境搭建&简易点灯——by shadow丶：
https://www.stmcu.org.cn/module/foru ... 271&fromuid=2072898
升级方法见：
【STM32F303开发】+ 失败的固件升级&点灯——by shadow丶
https://www.stmcu.org.cn/module/foru ... 253&fromuid=2072898
升级固件：
mbed的更新介绍
Revision historyV2.J24.M11
[*]Corrections
[*]bug fix SWV not working withV2J23Mx firmware on some recent PCs
[*]New features
[*]Provide a command for JTAG clock frequency selection
[*]Added support for management 32L053DISCOVERY and 32F3348DISCOVERY boards
[*]Added support for STM32F746
V2.J23.M10
[*]Fixed the MacOS Yosemite issue.
[*]The package contains 2 applications:
[*]STLinkUpgrade.exe for Windows ("old fashion")
[*]a new GUI (java application) expected to replace the old application on all platforms.
Some more details in "readme.txt" files inside the package.
V2.J23.M9
[*]Modification of flash programming algorithm for STM32F4, STM32F7 and STM32L4 microcontrollers families
[*]Added check against the validity of the application, when programmed through the mass storage interface (validity algorithm based on Reset and Stack Pointer values in the vector table)
[*]Set default SWCLK to 4MHz for better performance
V2.J23.M6
[*]Fixed the virtual comm port against a possible delay in data reception by the host (like a cache flush issue)
[*]Fixed the virtual comm port against a possible communication failure during data emission by the host on some USB3 ports
[*]Fixed the mass storage interface enumeration after a programming of the target application, reducing the risk to loose the VCP communication during such operation
[*]Fixed the suppression of one target reset sequence during the power on sequence
[*]Changed the SWD communication in order to reduce the noise generated by SWD signals
V2.J22.M5
[*]ST-Link firmware upgrade for correct support of Nucleo-F411RE by the MSD interface (drag&drop functionality).
V2.J21.M5
[*]This version contains a fix against a regression in TNRST management that does not directly impact the mbed drag&drop programming, but when the board is used from a debugger.
V2.J20.M4
[*]Suppressed “high speed device” notification when plugging to a non-high speed USB port or to an USB3 port
[*]Keep the virtual com port session valid (if any opened), when reprogramming the application
[*]Fixed potential lockup condition in SWV trace management and Virtual Com Port management
V2.J19.M3
[*]Fixes 8.3 filename error
[*]Fixes Chrome browser support
多谢分享。。 Paderboy 发表于 2015-6-21 16:54
多谢分享。。
谢谢支持 可以尝试下 楼主是好使的0.0 多谢分享 我的检测设备的时候只能发现Stlink debug 和 Mass storage,并没有虚拟串口，能使用你这个更新文件吗？还有为何我检测的更新版本比你的版本要低，V2.J24.M10 <----->V2.J24.M11？我怕点了YES后杯具，连基本的下载功能也用不了了！！
creep 发表于 2015-6-21 21:48
我的检测设备的时候只能发现Stlink debug 和 Mass storage,并没有虚拟串口，能使用你这个更新文件吗？还有 ...
！！！虚拟串口是要装驱动的
creep 发表于 2015-6-21 21:48
我的检测设备的时候只能发现Stlink debug 和 Mass storage,并没有虚拟串口，能使用你这个更新文件吗？还有 ...
【STM32F303开发】+ 失败的固件升级&点灯——by shadow丶
https://www.stmcu.org.cn/module/foru ... 253&fromuid=2072898
驱动安装 这里有详细说明！！ mark0668 发表于 2015-6-21 21:10
多谢分享
不谢 谢谢支持 creep 发表于 2015-6-21 21:48
我的检测设备的时候只能发现Stlink debug 和 Mass storage,并没有虚拟串口，能使用你这个更新文件吗？还有 ...
这个正常点没事 的就是升级到2.24.10下载本帖的2.24.11升级就是目前的最新固件了
串口需要驱动驱动装上就搞定驱动在之前的帖子里 creep 发表于 2015-6-21 21:48
我的检测设备的时候只能发现Stlink debug 和 Mass storage,并没有虚拟串口，能使用你这个更新文件吗？还有 ...
你说的是这个串口吗
如果是就按之前帖子装下0.0如果不是呃咱们再讨论
楼主实在不太了解什么是虚拟串口 （是指STlink的串口吗？。。。简单的说是不是上图的串口0.0）