有了解Adafruit1.8" TFT LCD shield扩展板的么
本帖最后由 z00 于 2015-1-11 20:27 编辑Adafruit1.8" TFT LCD shield扩展板http://www.adafruit.com/images/1200x900/802-03.jpg
STM32 NUcleo可以支持这个扩展板
想参考一下他的原理图重新做个PCB 有用过这个板子的么?
你说的这个,我在马云那儿都没找到 官方的介绍:
Specifications:
1.8" diagonal LCD TFT display
Physical dimensions: 2.71" (69mm) width, 2.1" (53.5mm) height, 0.27" (6.94mm) thickness (top of joystick)
128x160 resolution, 18-bit (262,144) color
ST7735R (datasheet) controller with built in pixel-addressable video RAM buffer
4 wire SPI digital interface
Built-in microSD slot - uses 2 more digital lines
5V compatible! Use with 3.3V or 5V logic Arduinos
Onboard 3.3V @ 150mA LDO regulator
2 white LED backlight, transistor connected. Defaults to 'on' but can be connected to a digital pin for PWM or simply turning off
Comes with header, requires soldering!
Display current draw is mostly based on the backlight, with full backlight the current draw is ~100mA, this does not include the SD Card. SD cards can draw 20-100mA based on read/write. Measure current draw in circuit to get precise numbers.
完全可以根据现有的屏自己设计,要用他的驱动库就得找能兼容的屏了 真心不了解特来学习一下 不是很清楚,挺你的 不懂帮顶啊 在ST的官方介绍视频里面看到这块板子,在大TB上竟然都没有搜到……期待原理图,,官方的伤不起啊!! 图片看不见了! http://www.adafruit.com/products/802 看不到图
页:
[1]
2