fengyiyu1006 发表于 2013-12-19 12:16:09

【STM32F0开发日志/评测/笔记】+adc采集和led闪烁

 代码修改自库函数例程ADC_LowPower和IO_Toggle，下面是代码：
#define BSRR_VAL        0x0300
 
ADC_InitTypeDef          ADC_InitStructure;
GPIO_InitTypeDef         GPIO_InitStructure;
TIM_TimeBaseInitTypeDef  TIM_TimeBaseStructure;
TIM_OCInitTypeDef        TIM_OCInitStructure;
 
void delay_ms(int i)
{
  int s;
  while(i--)
{
  s=8000;
  while(s--);
}
}
 
int main(void)
{
  RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOC, ENABLE);
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1, ENABLE);
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3, ENABLE);
 
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8 | GPIO_Pin_9;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
  GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
  GPIO_Init(GPIOC, &GPIO_InitStructure);
 
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1 ;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AN;
  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL ;
  GPIO_Init(GPIOC, &GPIO_InitStructure);
 
  /* TIM3 Configuration*/
  TIM_DeInit(TIM3);
  
  TIM_TimeBaseStructInit(&TIM_TimeBaseStructure);
  
  TIM_OCStructInit(&TIM_OCInitStructure);
    
  /* Time base configuration */
  TIM_TimeBaseStructure.TIM_Period = 0xFF;
  TIM_TimeBaseStructure.TIM_Prescaler = 0x0;
  TIM_TimeBaseStructure.TIM_ClockDivision = 0x0;
  TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;  
  TIM_TimeBaseInit(TIM3, &TIM_TimeBaseStructure);
  
  /* TIM3 TRGO selection */
  TIM_SelectOutputTrigger(TIM3, TIM_TRGOSource_Update);
 
  ADC_DeInit(ADC1);
  ADC_InitStructure.ADC_Resolution = ADC_Resolution_12b;
  ADC_InitStructure.ADC_ContinuousConvMode = ENABLE;
  ADC_InitStructure.ADC_ExternalTrigConvEdge = ADC_ExternalTrigConvEdge_Rising;    
  ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_T3_TRGO;
  ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
  ADC_InitStructure.ADC_ScanDirection = ADC_ScanDirection_Upward;
  ADC_Init(ADC1, &ADC_InitStructure); 
  ADC_ChannelConfig(ADC1, ADC_Channel_11 , ADC_SampleTime_28_5Cycles);   
  ADC_GetCalibrationFactor(ADC1);
  ADC_WaitModeCmd(ADC1, ENABLE); 
  ADC_AutoPowerOffCmd(ADC1, ENABLE); 
  ADC_Cmd(ADC1, ENABLE);     
  while(!ADC_GetFlagStatus(ADC1, ADC_FLAG_ADEN)); 
 
TIM_Cmd(TIM3, ENABLE);
 
  ADC_StartOfConversion(ADC1);
 
  while (1)
  { 
    /* Get ADC1 converted data */
    ADC1ConvertedValue = ADC_GetConversionValue(ADC1);
    
    /* Compute the voltage */
    ADC1ConvertedVoltage = (ADC1ConvertedValue * 3300)/0xFFF;
    /* Set PC8 and PC9 */
    GPIOC->BSRR = BSRR_VAL;
    delay_ms((int)(ADC1ConvertedVoltage/5));
    /* Reset PC8 and PC9 */
    GPIOC->BRR = BSRR_VAL;
    delay_ms((int)(ADC1ConvertedVoltage/5));
  }
}

沐紫 发表于 2013-12-19 13:21:34

RE:【STM32F0开发日志/评测/笔记】+adc采集和led闪烁

多谢楼主代码！:)
 
已添加到社区网友原创汇总：
STM32F030探索套件开发日志，中文教程，使用问答70篇

shenjack 发表于 2016-1-24 22:54:37

有错，不能用啊！

lusunch 发表于 2016-8-9 21:31:28

这么少？

asdfg221111 发表于 2018-6-19 22:40:53

仔细看看，怎么不附件一下呢，楼主:P
页: [1]
查看完整版本: 【STM32F0开发日志/评测/笔记】+adc采集和led闪烁