请问怎样用STM32做一个流水灯实验程序怎么写?谢谢!【悬赏问答】
用stm32的pc0-pc3连接四个led灯,让这四个led灯成流水形式亮,之后在pa9接一个中断,只要按下按键pa9就会产生中断并且所有的灯全部熄灭,经过四秒之后有的灯恢复流水灯模式,请问这样的程序怎么写?怎么做呢?谢谢大家!RE:请问怎样用STM32做一个流水灯实验程序怎么写?谢谢!
不知道楼主会51不,会51就一定能写出来,如果不会那就要另说了,看来楼主的变通能力不强呀...
回复:请问怎样用STM32做一个流水灯实验程序怎么写?谢谢!
回复第 2 楼 于2012-08-06 22:21:11发表:不知道楼主会51不,会51就一定能写出来,如果不会那就要另说了,
看来楼主的变通能力不强呀.
不会呢,麻烦你帮帮忙吧,给我解说下呢,谢谢哈,急用呢。学的不是很好呢,现在要做实验没办法呢,谢谢你哈。
回复:请问怎样用STM32做一个流水灯实验程序怎么写?谢谢!【悬赏问答】
主程序循环执行流水灯,按键中断执行灯熄灭延时,楼主要多动手练习回复:请问怎样用STM32做一个流水灯实验程序怎么写?谢谢!【悬赏问答】
找个GPIO的程序认真学习下,相信你应该能搞定RE:请问怎样用STM32做一个流水灯实验程序怎么写?谢谢!【悬赏问答】
同意楼上的方案..另一种方案是 开一个定时器做计时使用,主循环中查看变量
inttimerled = 0;
intledCount = 1;//1代表灯亮 0代表等灭
inti = 0;
char ledoff = 0;
inttimerkey = 0;
while(1)
{
if(!ledoff)
{
ledCount = 1;
for(i = 0;i < 16;i++)
{
GPIOA->ODR = ledCount;
ledCount
RE:请问怎样用STM32做一个流水灯实验程序怎么写?谢谢!【悬赏问答】
可以在网上找个流水灯程序学习学习。RE:请问怎样用STM32做一个流水灯实验程序怎么写?谢谢!【悬赏问答】
这是,什么样的一个,程序?RE:请问怎样用STM32做一个流水灯实验程序怎么写?谢谢!【悬赏问答】
#include "stm32f10x.h"GPIO_InitTypeDef GPIO_InitStructure;
void RCC_Configuration(void);
void Delay(__IO uint32_t nCount);
int main(void)
{
//uint16_t a;
/* System Clocks Configuration **********************************************/
RCC_Configuration();
//
/* Configure all unused GPIO port pins in Analog Input mode (floating input
trigger OFF), this will reduce the power consumption and increase the device
immunity against EMI/EMC *************************************************/
/*RCC_APB2PeriphClockCmd( RCC_APB2Periph_USART1 |RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB |
RCC_APB2Periph_GPIOC | RCC_APB2Periph_GPIOD |
RCC_APB2Periph_GPIOE, ENABLE);
*/
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC | RCC_APB2Periph_GPIOD,ENABLE);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6|GPIO_Pin_7; //D1D2
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOC, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6|GPIO_Pin_13; //D3, D4
GPIO_Init(GPIOD, &GPIO_InitStructure);
while (1)
{
GPIO_SetBits(GPIOC, GPIO_Pin_6);// D1亮
Delay(0xAFFFF);
GPIO_SetBits(GPIOC, GPIO_Pin_7 ); //D2亮
GPIO_ResetBits(GPIOC, GPIO_Pin_6); //D1灭
Delay(0xAFFFF);
GPIO_SetBits(GPIOD, GPIO_Pin_13 ); //D3亮
GPIO_ResetBits(GPIOC, GPIO_Pin_7); //D2灭
Delay(0xAFFFF);
GPIO_SetBits(GPIOD, GPIO_Pin_6 ); //D4亮
GPIO_ResetBits(GPIOD, GPIO_Pin_13); //D3灭
Delay(0xAFFFF);
GPIO_ResetBits(GPIOD, GPIO_Pin_6); //D4灭
}
}
void RCC_Configuration(void)
{
/* Setup the microcontroller system. Initialize the Embedded Flash Interface,
initialize the PLL and update the SystemFrequency variable. */
SystemInit();
}
void Delay(__IO uint32_t nCount)
{
for(; nCount != 0; nCount--);
}
#ifdefUSE_FULL_ASSERT
/**
* @briefReports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval : None
*/
void assert_failed(uint8_t* file, uint32_t line)
{
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* Infinite loop */
while (1)
{
}
}
#endif:D
回复:请问怎样用STM32做一个流水灯实验程序怎么写?谢谢!【悬赏问答】
回复第 4 楼 于2012-08-08 12:00:23发表:主程序循环执行流水灯,按键中断执行灯熄灭延时,楼主要多动手练习
谢谢你哈。我会好好努力的。
页:
[1]
2